Optimal Absorbent Evaluation for the CO2 Separating Process by Absorption Loading,Desorption Efficiency,Cost, and Environmental Tolerance

The CO₂ absorption capacities of potassium glycinate, potassium sarcosinate (choline, proline), mono-ethanolamine (MEA), and tri-ethanolamine were evaluated to find the optimal absorbent for separating CO₂ from gaseous products by a CO₂ purification process. The absorption loading, desorption efficiency, cost, and environmental tolerance were assessed to select the optimal absorbent. MEA was found to be the optimum absorbent for separating the CO₂ and H₂ mixture in gaseous product. The maximum absorption loading rate was 0.77 mol CO₂ per mol MEA at temperature of 20°C and absorbent concentration of 2.5 mol/L, whereas desorption efficiency was 90% by heating for 3 h at 130°C. MEA was found to be an optimal absorbent for the purification process of CO₂ during gaseous production.     

Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

单宁为模板制备纳米二氧化钛 及其对钍的吸附性能

以杨梅单宁(BT)为模板,水热法合成纳米二氧化钛(BT-NTO)。采用XRD、FTIR、SEM和TEM技术对BT-NTO的结构及形貌进行了表征。将BT-NTO用于吸附溶液中的Th~(4+),在溶液pH为3.5、温度为25℃、Th~(4+)初始浓度为0.5 mmol/L的条件下,BT-NTO对Th~(4+)的吸附量为0.905 8 mmol/g;吸附过程符合准二级动力学方程和Langmuir等温吸附方程;溶液中共存的Zn~(2+)、Ni~(2+)、Co~(2+)、Sr~(2+)、Yb~(3+)、Nd~(3+)、Sm~(3+)、Gd~(3+)、La~(3+)、Cl-、ClO4-离子对Th~(4+)吸附量影响较小;BT-NTO的重复使用性能较好。     

植物大气污染响应高光谱监测实例研究

选择某钢铁企业绿化树种桂花当年生叶片作为供试样本,测试叶片光谱反射率之后分别测试叶液pH值、叶片含硫量、叶绿素含量、叶片含水量,研究生长在S02 污染环境下桂花叶片光谱的变化以及相应的部分生理生化指标的变化.研究表明,污染较严重生产区采集的叶片光谱反射率和红边斜率均较生活区低.叶片含硫量随大气SO2 浓度的增减而相应地变化,叶片叶绿素含量、叶液pH值、叶片含水量的变化规律与叶片含硫量和大气SO2浓度的变化规律相反.     

Ti/MnO2/PbO2电极的制备及电催化降解罗丹明B

采用电沉积法制备了Ti／MnO2／PbO2电极，并用其对质量浓度为20mg／L的罗丹明B模拟废水进行了电催化降解实验。实验结果表明：原水pH为4．95，无须调节废水的pH；最佳电解实验条件为：支持电解质NazSO4浓度0．09mol／L，电解电流密度40mA／cm^2，处理时间40min，在此条件下罗丹明B的去除率接近100％。     

亚氧化钛膜电极电化学特性及其处理印染工业废水的效能研究

电化学氧化法具有稳定高效、操作灵活、集成度高等特点,在处理难降解有机废水领域具有独特优势.电化学废水处理过程通常受限于传质速率,而膜电极有望解决这一瓶颈问题.亚氧化钛膜电极（TiSO-ME）的化学结构与电化学性质结果显示,经过高温还原法制备的TiSO-ME电极主要由Ti₄O₇和少量Ti₅O₉组成,大孔体积占总孔体积的92.7%,平均孔径为0.508 μm.电化学测试结果表明,TiSO-ME具有良好的导电性、高析氧电位和电化学稳定性.过滤试验结果表明,在0.82×10^-3~3.14×10^-3 mL·cm^-2·s^-1范围内膜通量与传质系数成正比.在电流密度为8 mA·cm^-2,膜通量为2.31×10^-3 mL·cm^-2·s^-1的条件下,电解1.5 h即可有效处理实际印染工业废水,sCOD去除率高达96.07%,电流效率可达24.22%,电能消耗较不存在膜通量时降低了32.99%.TiSO-ME能够实现废水在膜孔结构内部的穿流式操作,有效克服旁流式操作传质受限的问题,在小规模分散式工业废水处理中有着重要的研究价值和发展潜力.     

基于腔衰减相移光谱法的二氧化氮分析仪的设计与应用

基于腔衰减相移光谱法设计了一套二氧化氮在线分析仪,通过优化测量参数,该仪器可长期稳定运行,其时间分辨率为60 s,检出限为0.191 ppb,在0~300 ppb范围内,NO₂气体浓度与相位正切信号值具有较好的二次拟合关系,R²为0.9995.另外,该仪器在泰安站进行了长期外场观测,并与改装后的进口商品化仪器PKU-Thermo 42i-TL进行比对实验,结果表明,两者的测量结果一致性较好,R²=0.9811,表明其具有良好的运行稳定性和测定结果准确性,适用于环境大气二氧化氮浓度的在线监测.外场观测结果表明,春季泰安站二氧化氮浓度均值为12.39 ppb,有明显日变化规律.     

Ca(OH)2解吸并固定混合吸收液中CO2的实验研究

CO₂化学吸收法分离纯度高,技术成熟,但能耗过高及成本是困扰该技术发展的瓶颈.在常压条件下对利用Ca（OH）₂直接矿物碳酸化固定MDEA/PZ混合吸收富液中CO₂进行了一系列实验研究,考察了吸收液负荷、Ca（OH）₂投加量、pH、温度及搅拌速率等因素对解吸率的影响,并利用动态吸收-解吸循环实验研究了其CO₂吸收性能和循环使用稳定性,最后对碳酸化反应产物进行了XRD、TEM分析.结果表明,在常压条件下,Ca（OH）₂可以通过液相直接矿物碳酸化对CO₂进行直接固定,并实现吸收富液的再生;随着负荷的升高及Ca（OH）₂投加量、pH、搅拌速率的增大,解吸率随之增加;随着溶液温度升高,解吸率下降;经过5次动态吸收-解吸循环实验后CO₂吸收量可以达到并保持在0.57 mol·L^-1,显示出了良好的循环稳定性.     

Tuning the fill percentage in the hydrothermal synthesis process to increase catalyst performance for ozone decomposition

The performance of Ce-OMS-2 catalysts was improved by tuning the fill percentage in the hydrothermal synthesis process to increase the oxygen vacancy density. The Ce-OMS-2 samples were prepared with different fill percentages by means of a hydrothermal approach (i.e. 80%, 70%, 50% and 30%). Ce-OMS-2 with 80% fill percentage (Ce-OMS-2-80%) showed ozone conversion of 97%, and a lifetime experiment carried out for more than 20?days showed that the activity of the catalyst still remained satisfactorily high (91%). For Ce-OMS-2-80%, Mn ions in the framework as well as K ions in the tunnel sites were replaced by Ce⁴⁺, while for the others only Mn ions were replaced. O₂-TPD and H₂-TPR measurements proved that the Ce-OMS-2-80% catalyst possessed the greatest number of mobile surface oxygen species. XPS and XAFS showed that increasing the fill percentage can reduce the AOS of Mn and augment the amount of oxygen vacancies. The active sites, which accelerate the elimination of O₃, can be enriched by increasing the oxygen vacancies. These findings indicate that increasing ozone removal can be achieved by tuning the fill percentage in the hydrothermal synthesis process.     

Effect of TiO2 nanoparticle aggregation on marine microalgae Isochrysis galbana

TiO_2 nanoparticles(NPs) could adversely impact aquatic ecosystems. However, the aggregation of these NPs could attenuate this effect. In this work, the biological effects of TiO_2 NPs on a marine microalgae Isochrysis galbana were investigated. The aggregation kinetics of TiO_2 NPs under different conditions was also investigated to determine and understand these effects. Results showed that, though TiO_2 NPs had no obvious impact on the size and reproducibility of algal cells under testing conditions, they caused a negative effect on algal chlorophyll, which led to a reduction in photosynthesis. Furthermore, fast aggregation of TiO_2 NPs occurred under all conditions, especially at the pH close to the p Hzpc. Increasing ionic strength and NP concentration also enhanced the aggregation rate.The aggregation and the following sedimentation of TiO_2 NPs reduced their adverse effects on I. galbana.